ZANKER KIT6460XXK Manual de usuario descargar pdf (Pagina 25)

Problem Possible cause Remedy

You do not set the heat setting for

10 seconds.

Activate the hob again and set the

heat setting in less than 10 sec-

onds.

You touched 2 or more sensor fields

at the same time.

Touch only one sensor field.

There is water or fat stains on the

control panel.

Clean the control panel.

An acoustic signal sounds and the

hob deactivates.

An acoustic signal sounds when the

hob is deactivated.

You put something on one or more

sensor fields.

Remove the object from the sensor

fields.

The hob deactivates. You put something on the sensor

field .

Remove the object from the sensor

field.

Residual heat indicator does not

come on.

The zone is not hot because it oper-

ated only for a short time or the sen-

sor is damaged.

If the zone operated sufficiently long

to be hot, speak to an Authorised

Service Centre.

Automatic Heat Up does not oper-

ate.

The zone is hot. Let the zone become sufficiently

cool.

The highest heat setting is set. The highest heat setting has the

same power as the function.

The heat setting changes between

two levels.

Power management operates. Refer to "Daily use".

The sensor fields become hot. The cookware is too large or you

put it too near to the controls.

Put large cookware on the rear

zones if possible.

comes on.

Child Safety Device or Lock oper-

ates.

Refer to "Daily use".

comes on.

There is no cookware on the zone. Put cookware on the zone.

The cookware is unsuitable. Use suitable cookware. Refer to

"Hints and tips".

The diameter of the bottom of the

cookware is too small for the zone.

Use cookware with correct dimen-

sions. Refer to "Technical data".

and a number come on.

There is an error in the hob. Deactivate the hob and activate it

again after 30 seconds. If

comes on again, disconnect the hob

from the electrical supply. After 30

seconds, connect the hob again. If

the problem continues, speak to an

Authorised Service Centre.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Comentarios a estos manuales

Sin comentarios

ZANKER KIT6460XXK Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Placas ZANKER KIT6460XXK