ZANKER ZKF680ITXB Manual de usuario descargar pdf (Pagina 25)

Electrical connection

• Make sure that the rated voltage and type of power

on the rating plate agree with the voltage and the

power of the local power supply.

• This appliance is supplied with a mains cable and a

plug.

• Always use a correctly installed shockproof socket.

• Make sure that there is an access to the mains plug

after the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• There is a risk of fire when the appliance is in

connection with an extension cable, an adapter or a

multiple connection. Make sure that the ground

connection agrees with the standards and

regulations.

• Do not let the power cable to heat up to a

temperature higher than 90° C.

Make sure that you connect the blue

neutral cable to the terminal with a letter

"N" on it. Connect the brown (or black)

phase cable to the terminal which has a

letter "L". Keep the phase cable

connected at all times.

Connection cable

To replace the connection cable use only the special

cable or its equivalent. The cable type is: H05V2V2-

FT90.

Make sure that the cable section is applicable to the

voltage and the working temperature. The yellow /

green earth wire must be approximately 2 cm longer

than the brown (or black) phase wire.

Assembly

min. 55 mm

min. 650 mm

560 mm

min. 100 mm

30 mm

480 mm

50 mm

400 mm

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

ZANKER ZKF680ITXB Manual de usuario Pagina 25