ZANKER ZKF680ITXB Manual de usuario descargar pdf (Pagina 22)

Pan supports

The pan supports are not resistant to

washing in a dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily clean the hob.

Be very careful when you replace

the pan supports to prevent the hob

top from damage.

2. The enamel coating occasionally can have rough

edges, so be careful when you wash the pan

supports by hand and dry them. If necessary,

remove stubborn stains with a paste cleaner.

3. After you clean the pan supports, make sure that

they are in correct positions.

4. For the burner to operate correctly, make sure that

the arms of the pan supports are aligned with the

centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil,

sugar and food with sugar. If not, the dirt can cause

damage to the hob. Take care to avoid burns.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny metallic

discoloration. Clean the hob with a moist cloth and

non-abrasive detergent. After cleaning, wipe the hob

dry with a soft cloth.

• To clean the enamelled parts, cap and crown, wash

them with warm soapy water and dry them carefully

before you put them back on.

Cleaning the spark plug

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these components

well clean to prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas supply

pipe and the pressure adjuster, if fitted.

Troubleshooting

Warning! Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when you try to

activate the spark generator.

The hob is not connected to an

electrical supply or it is connected

incorrectly.

Check if the hob is correctly connec-

ted to the electrical supply.

The fuse is blown. Make sure that the fuse is the cause

of the malfunction. If the fuse is

blown again and again, contact a

qualified electrician.

Burner cap and crown are placed in-

correctly.

Place the burner cap and crown cor-

rectly.

The flame extinguishes immediately

after ignition.

Thermocouple is not heated up suf-

ficiently.

After lightning the flame, keep the

knob pushed for equal or less than

10 seconds.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comentarios a estos manuales

Sin comentarios

ZANKER ZKF680ITXB Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Placas ZANKER ZKF680ITXB