ZANKER EHI672X Manual de usuario descargar pdf (Pagina 8)

Electrical connection to the

terminal box

The appliance is fitted with a five pole terminal box whose

cables are predisposed for a 230 V monophase function

(Fig. 10).

In case of a different voltage, carry out the connection

as shown in Fig. 11.

The earth wire should be connected to the terminal

marked by the sign After having connected the wire

to the terminal secure it with a cable clip.

The connection must be carried out in conformity with the

regulations and dispositions of the laws in force. Before

connecting ensure that:

! the limiter valve and the electrical mains can support

the voltage of the appliance (see label).

! the power supply is correctly earthed according to

regulations in force.

! the omnipolar interrupter used can be easily reached

once the appliance has been installed.

The appliance is supplied without cable. Use a cable Type

HO5RR-F / H05V2V2 (T90), suitable for the existing

power suply, with a section suitable for the charge of a

normalized plug.

The cable must be fitted with three conductors. The earth

wire is coloured yellow/green. If a direct connection to the

mains is required an omnipolar interrupter with a minimum

opening of 3 mm between contacts should be interposed

between the appliance and the supply. The yellow/green

earth wire must not be interrupted by the interrupter. The

supply cable must be positioned in such a way that it will

at no point reach a temperature 50½C above that of room

temperature. After connection try out the heating

elements by allowing them to function for about three

minutes. The manufacturer declines all responsibility if the

accident prevention regulations are not respected.

Electrical connection

Fig. 10

FO 0488

Type of Monophase Triphase Triphase Y Biphase Y

connection 3f. + neutre 2f. + neutre

Connection

cable with

terminal box

Network

tension 230 V

230 V

400 V

3N 400 V

Heating

element 230 V 230 V 230 V 230 V

tension

3 X 2,5 mm

4 X 1,5 mm

5 X 1,5 mm

4 X 1,5 mm

18 A 13 A 13 A 13 A

321

All-electric

appliance

FIG. 11 - CHOICE OF CONNECTION CABLE AND FUSE GUAGE (in Amps)

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

ZANKER EHI672X Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Placas ZANKER EHI672X