
Hints and tips
Warning! Refer to Safety chapters.
Cookware
The bottom of the cookware must be as
thick and flat as possible.
Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause the colour change on the glass-
ceramic surface.
Care and cleaning
Warning! Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have no
effect on how the hob operates.
• Use a special cleaner applicable for the surface of
the hob.
• Use a special scraper for the glass.
Cleaning the hob
• Remove immediately: melted plastic, plastic foil,
sugar and food with sugar. If not, the dirt can cause
damage to the hob. Take care to avoid burns. Put
the special scraper on the glass surface at an acute
angle and move the blade on the surface.
• Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny metallic
discoloration. Clean the hob with a moist cloth and
non-abrasive detergent. After cleaning, wipe the hob
dry with a soft cloth.
• Remove shiny metallic discoloration: use a
solution of water with vinegar and clean the glass
surface with a moist cloth.
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
Problem Possible cause Remedy
You cannot activate or operate the
hob.
The fuse is blown. Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Residual heat indicator does not
come on.
The zone is not hot because it oper-
ated only for a short time or the sen-
sor is damaged.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
There is a dark area on the
multiple zone.
It is normal that there is a dark area
on the multiple zone.
15
Comentarios a estos manuales