ZANKER KEI6530XWK Manual de usuario descargar pdf (Pagina 7)

etc.). An acoustic signal sounds and the hob

deactivates. Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a saucepan boils

dry). Let the cooking zone cool down before you use

the hob again.

• you use incorrect cookware. The symbol comes

on and the cooking zone deactivates automatically

after 2 minutes.

• you do not deactivate a cooking zone or change the

heat setting. After some time comes on and the

hob deactivates.

The relation between the heat setting and the time

after which the hob deactivates:

Heat setting The hob deactivates af-

ter

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat setting or move

your finger along the control bar until you reach the

correct heat setting.

Bridge function

This function connects two left side cooking zones and

they operate as one.

First set the heat setting for one of the left side cooking

zones.

To activate the function: touch

. To set or change

the heat setting touch one of the control sensors.

To deactivate the function: touch . The cooking

zones operate independently.

Automatic Heat Up

Activate this function to get a desired heat setting in a

shorter time. When it is on, the zone operates on the

highest setting in the beginning and then continues to

cook at the desired heating setting.

To activate the function the cooking zone

must be cold.

To activate the function for a cooking zone: touch

( comes on). Immediately touch the correct heat

setting. After 3 seconds comes on.

To deactivate the function: change the heat setting.

Power function

This function makes more power available to the

induction cooking zones. The function can be activated

for the induction cooking zone only for a limited period

of time. After this time the induction cooking zone

automatically sets back to the highest heat setting.

Refer to “Technical information” chapter.

To activate the function for a cooking zone: touch

. comes on.

To deactivate the function: change the heat setting.

Power function with a double ring cooking zone

The function is activated for the inner ring when the hob

senses the cookware with a smaller diameter than the

inner ring. The function is activated for the outer ring

when the hob senses the cookware with a bigger

diameter than the inner ring.

Timer

Count Down Timer

You can use this function to set how long the cooking

zone should operate for a single cooking session.

First set the heat setting for the cooking zone then set

the function.

To set the cooking zone: touch again and again

until the indicator of a necessary cooking zone comes

on.

To activate the function: touch of the timer to set

the time (00 - 99 minutes). When the indicator of the

cooking zone starts to flash slowly the time counts

down.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

ZANKER KEI6530XWK Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas ZANKER KEI6530XWK