ZANKER KEV6530RXK Manual de usuario descargar pdf (Pagina 7)

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the

hob.

Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the

hob,

• you spill something or put something on the control

panel for more than 10 seconds (a pan, a cloth,

etc.). An acoustic signal sounds and the hob

deactivates. Remove the object or clean the control

panel.

• you do not deactivate a cooking zone or change the

heat setting. After some time

comes on and the

hob deactivates.

The relation between the heat setting and the time

after which the hob deactivates:

Heat setting The hob deactivates af-

ter

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat setting or move

your finger along the control bar until you reach the

correct heat setting.

Activating and deactivating the outer rings

You can adjust the surface you cook to the dimension of

the cookware.

Use sensor field:

To activate the outer ring: touch the sensor field. The

indicator comes on.

To deactivate the outer ring: touch the sensor field

until the indicator goes out.

Automatic Heat Up

Activate this function to get a desired heat setting in a

shorter time. When it is on, the zone operates on the

highest setting in the beginning and then continues to

cook at the desired heating setting.

To activate the function the cooking zone

must be cold.

To activate the function for a cooking zone: touch

( comes on). Immediately touch a desired heat

setting. After 3 seconds comes on.

To deactivate the function: change the heat setting.

Timer

Count Down Timer

You can use this function to set how long the cooking

zone should operate for a single cooking session.

First set the heat setting for the cooking zone then set

the function.

To set the cooking zone: touch

again and again

until the indicator of a necessary cooking zone comes

on.

To activate the function: touch of the timer to set

the time (00 - 99 minutes). When the indicator of the

cooking zone starts to flash slowly the time counts

down.

To see the remaining time: set the cooking zone with

. The indicator of the cooking zone starts to flash

quickly. The display shows the remaining time.

To change the time: set the cooking zone with .

Touch or .

To deactivate the function: set the cooking zone with

and touch . The remaining time counts back to

00. The indicator of the cooking zone goes out.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios

ZANKER KEV6530RXK Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas ZANKER KEV6530RXK